It is a big problem for unprofessional people to install or use the gold separator gold shaking table. How to install and how to use it is extremely important to us. Before installation, we need to read the instructions completely and say that we have an understanding of it before we can install it. Then we can't use it by our own cognition. That will cause some unnecessary damage and failure to the gold separator gold shaking table. Let's ask professional manufacturers how to use the gold separator gold shaking table for you.
When installing the ore shaker table, it must be on the horizontal foundation surface, hit the level of the small channel steel bracket with a level ruler, and then install the bed surface, the machine foot, the head of a bed and the trough bucket on the small channel steel bracket in turn. The bed surface and the head of the bed must be installed on a horizontal line. Connect the power supply, empty the car and test the machine. The pulley should be clockwise. If it is reversed, the oil pipe inside the headstock will not be oiled. On the side of the switch, change the position of two adjacent wires to achieve steering exchange.
After the normal operation of shaker table for gold, it is advisable that the whole bed surface should be covered with water for trial running. The size of the feed particles must be uniform, and the feeding should be moderate and uniform, not too large and too small, which will easily affect the zoning of the ore belt. After ore feeding, adjust the slope according to the situation of ore belt, which is generally determined by the separation of ore test. If the ore belt is wide, it is necessary to adjust the handwheel of the machine foot, turn in time, and the slope of the bed surface increases. It should be noted that the two handwheels before and after the machine foot need to do the same adjustment at the same time. Sand gold mine, as an element with a large proportion, will run at a flat upper end on the bed surface. In the process of mining, we don't need to connect this part carefully, but can connect with ferrous metal mine, and then mix the gold with mercury. In this way, fine particles of gold will not be taken away by ferrous metal ore, and the recovery of gold placer is improved.
If you are interested in shaking table, welcome to contact me: Mobile/Whatsapp/Wechat/skype: +86 15170750797 E-mail: sales8@jxchangyi.com
