According to the questions about efficiency and productivity from our buyers and customers, in this article, we will share 5 ways to enhance the efficiency of sand washing machines, such as wheel sand washing machines or spiral sand washing machines.
Prevent debris from entering the loading port
Sand cleanliness and mud content are some of the reasons for the decline in sand washing machine production.
In the cleaning process of the sand washer, it is necessary to prevent impurities from affecting the cleaning effect of the finished product. In addition, high hardness materials must be prevented from entering the interior of the machine, which will lead to wear and tear of the equipment, reducing the service life.
Reasonable control of the level of sand washing machine
When the liquid level is too low, the cleaning effect can not be achieved; when the liquid level is too high, the water resources are wasted but did not achieve the desired cleaning effect, the ore is likely to overflow. The amount of material for one-time cleaning must be within the specified range, otherwise, it is easy to fail.
Adjust the concentration to the critical value
Ore concentration is the main factor that needs to be adjusted during the operation of the sand washing machine. It is related to the graded particle size, but also with the processing capacity of the particle size under the relevant.
The processing capacity of the sand washing machine is maximized at critical concentrations. The critical concentration is related to the specified graded particle size and varies with ore density and mud content.
The higher the ore density or the lower the amount of mud, the higher the critical concentration, and vice versa, of course, the relationship between the critical concentration and the grading particle size and the same amount of mud, i.e., the lower the grading particle size, the smaller the critical concentration.
Clarify sand and gravel properties
The production capacity of sand washing machine is related to the nature of sand and gravel, including the hardness, density, mud content, and particle size of sand and gravel materials. For example, uneven sand and gravel materials and their different properties may affect the processing capacity of sand washing equipment. The density of the material is proportional to the production capacity of the sand washing machine. The impact of mud content and ore particle size is mainly reflected in the viscosity of the mud, reducing the viscosity, improve the sedimentation rate of mineral particles. Sand washing machine processing capacity and classification accuracy will be better.
Make sure the installation is in the right place
Sand washing machine to be placed in the right position can be placed on the ground, can also be placed high, but the plane must be hard enough, can not be placed close to the water source. These places are prone to collapse. Cause unnecessary production trouble. In addition, there must be enough production space to ensure stable material transport and production, and there is enough storage space to store the sand after the cleaning mechanism, in order to avoid secondary pollution.
When you encounter these situations, we hope these 5 methods will help you.
