In order to take advantage of the rock or ore obtained by quarrying/blasting in the mining and construction sector, the material needs to be crushed to reduce it to a smaller size. We call this process size reduction or crushing.
The goal of reducing the size is as follows:
1. Obtain the size or surface area required for the use of ore or material
2. Easy to transport and store
3. Separate the different minerals contained in the ore and release them to each other
4. To obtain the desired size or surface area of the concentration stage.
Pre crushing
This is the first stage of the crushing process.Typically, the size of the feed is between 800 and 1500 mm, reduced to between 150 and 300 mm
Secondary crushing
This is the second stage of crushing.The feed size of the rock or ore from the primary crushing process is about 150 to 300 mm, reduced to 50 to 80 mm
Third crushing
This is the third stage of crushing.The size of the ore or rock from the secondary crushing process is about 50-80 mm, reduced to 5-12 mm.
We can offer stone crushers that perform the crushing process.
The goal of reducing the size is as follows:
1. Obtain the size or surface area required for the use of ore or material
2. Easy to transport and store
3. Separate the different minerals contained in the ore and release them to each other
4. To obtain the desired size or surface area of the concentration stage.
In general, according to the desired size of the material, crushing is divided into three stages.
Pre crushing
This is the first stage of the crushing process.Typically, the size of the feed is between 800 and 1500 mm, reduced to between 150 and 300 mm
Secondary crushing
This is the second stage of crushing.The feed size of the rock or ore from the primary crushing process is about 150 to 300 mm, reduced to 50 to 80 mm
Third crushing
This is the third stage of crushing.The size of the ore or rock from the secondary crushing process is about 50-80 mm, reduced to 5-12 mm.
We can offer stone crushers that perform the crushing process.
Other Products
-
Characteristics of separation of placer gold spiral chute
-
Characteristics of metal beneficiation by flotation machine
-
What are the precautions for using 6S mineral processing shaking table?
-
Action point of gold mining shaker table beneficiation
-
What is the continuous working principle of ceramic ball mill for mining machinery?
-
What are the application fields of crushing equipment for mining machinery?
-
Is Gold Ore Crushing Machine Expensive? How Much Is It?
-
Method of Iron Ore Beneficiation - Ore Dressing Process of Siderite
-
How to Keep Long-service-life Vibration Screen?
-
Working Principle Of Stone Crusher In Mining And Construction
-
Brief Introduction of Maximizing Crushing Efficiency